## Tips 5 slimes are needed, minimum, to track lower body. It wont work with only three (for maths reasons) ### Setup - Sync while turned off - [Onboarding process](https://www.youtube.com/watch?v=UaqDyOwuDJA) ## Issues - Prone to floating and drifting - The skating can be heavily mitigated by our anti-skating option, which can be dialed up or down depending on personal preference. The better your skeleton is, the less you will need this. Just to clear up a few things: 1.2. 3. Joycons are really, really bad. Try not to judge slimevr on its tracking fidelity after using just joycons. Its the bottom of the barrel in terms of IMU performance. 4. Recalibration via autobone - The autobone never needs to be done after you get your proportions correct (unless your are growing). The 4 moves only need to be done once in the thirty second window. - once you get your body measurements correctly you never need to do the little hula dance ever again. When your trackers move position you can just do a full reset and mounting reset which are consistent and take about 20 seconds combined. So your extra calibrations after you got it right werent even needed! you only ever need to do the full and mounting reset at the very start, which takes all of 20 seconds while standing. Then when you notice drift, which takes at least 20-30 minutes with a lot of physical movement, you do the yaw/fast resets which is done in like 3 seconds. And when you do the yaw/fast reset, you do not need to stand up in a t-pose or recalibate your VRChat avatar tracking! You can do it while standing, sitting, or laying down, as long as your torso, arms, and legs, are facing the same direction as your HMD. ## Positioning ### Extensions The suggested extension locations are: A chest extension attached to the hip tracker. A left foot extension attached to the left ankle tracker. A right foot extension attached to the right ankle tracker. ## Uses - Vtubing duh - natural locomotion - Blade and Sorcery